Cameron is an excellent image for your company. He is very thorough in diagnosing and repairing any problems.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Came out quickly and got us back up and running. Very knowledgeable and answered all out questions
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
We have been using Comfort Central for a few years now and have had excellent service with Tech. Alex. He is kind, polite, and courteous, calls before he arrives, and he knows the HVAC systems. When finished, we cannot even tell he was here. Super clean and neat. The company overall is well managed and accommodating to meet our time frames and needs. We highly recommend Comfort Central and Alex to anyone who mentions HVAC. Thank you for your great service to all at Comfort Central. Peter.
Overall Experience
Quality
Price
Convenience
Alex has been servicing our HVAC system for over a year. He is kind, clean, well mannered, and knows the equiptment very well. I would recommend him and Comfort Central to others.
Overall Experience
Quality
Price
Convenience
First off the technician notified me that he was going to be a little early. I always appreciate when the provided service notifies me when they will be either late or early. Also, I really appreciated that he was early. He was also very thorough and explained everything to me. Very professional. Wonderful experience overall in a day where customer service is suffering.
Overall Experience
Quality
Price
Convenience
Found system acting like low on refrigerant - checked heat pump driers and valves - forced system into high stage, added 6 oz r410a and checked system operation- found thermostatic expansion valve (TXV) not adjusting to refrigerant balance changes. Tried adjusting system TXV - system TXV is stuck - recommend replacement of TXV
Found system low on r-22 refrigerant estimate about 4.5 lbs down. Recommend replacement of air conditioner and coil and potentially furnace as well due to age of equipment.
Performed AC maintenance tune up service on minisplit systems checking all electrical components, refrigerant balance, unit start up, operation, shutdown, cleaning of indoor and outdoor coils, treatment of drains.
Replaced transducer. Pressure tested. Pull vac and weigh back in for 10 a refrigerant. Tested transducer pressures from board to my gauges. They were pretty much the same.
Found that pressure transducer has failed on heat pump. My Gauge pressure is showing 93psi but board is showing 14psi with system in standby. called tech support to verify issue.
Found neutral wire for condenser fan motor fell out of its crimp and was hanging in space. Refit wire to contactor and cycled to check operation. Everything came on and cycled normally.
Found system about 3 oz low on r410a refrigerant and locked out with h5 error code - p2 low pressure lock out - removed fault and cycled to check operation. Everything appears to run normally again!
Found defrost board and sensor had failed - replaced and cycled system to check operation.
Found that the wire on the coil temperature sensor for defrost was shorting to the outdoor unit when system went into defrost. Put electrical tape on wire and tested system operation. System is now working properly.
Ultimate Heating Tune-Up Heat Pump: serviced and inspected heat pump system, including electrical, safeties, controls, reversing valve and defrost cycle to manufacturer specifications. Everything is working as designed
mate Heating Tune-Up Gas Heat: serviced and inspected gas heating system checking air flow, temperature rise, electrical, gas pressure, safeties, controls and limits, heat exchanger and venting. cleaned and checked system components to manufacturer specifications and performed combustion inspection. Caulked vent on outside wall penetration to try and deaden the ticking sound Everything is running as designed
Performed heating tune up on gas furnace and heat pump system.
Performed fall maintenance Compressor is pulling 7 amps Outdoor fan motor is pulling 1.2 amps Blower motor is pulling 1.2 amps Temperature difference between the return and supply is 28 Capacitors are within manufacturer specifications.
Cooling tune up Compressor is pulling 8 amps Outdoor fan motor is pulling 1 amp Capacitor is within manufacturer specifications Subcool is 12 Superheat is 12 Indoor blower is pulling .8 amps Temperature difference between return and supply is 20 Cleaned indoor and outdoor coils Cleared condensate drain System is great working condition.
Performed AC maintenance tune up service on air conditioning system checking all electrical components, refrigerant balance, unit start up, operation, shutdown, cleaning of indoor and outdoor units, flushing and treatment of drains and condensate lines. Everything looks and runs great!